Mobile Water Treatment System

Advanced electro oxidation mobile water treatment system MC700 is set to treat wastewater refractory to conventional treatment methods.

Product Description:

Containerized Electro Oxidation Wastewater Treatment Solution, Introducing Mobile Water Treatment System MC700

Conventional biological or chemical treatment methods and approaches usually reach a bottleneck when it comes to treatment of organic loads at high concentration, color and turbidity, specific recalcitrant organic pollutants, wider ranges of bacterias and viruses, and other pathogens, our engineering team are here to offer engineered electro oxidation wastewater treatment solution to bridge the gap.

The MC700 mobile water treatment system, with electro oxidation wastewater treatment technology as the core technique approach, boron-doped diamond BDD electrode as the basic component, it integrates the complete electro oxidation wastewater treatment plant in one single containerized unit which grant easy transportation, rapid deployments and installation, steady consistent operationis, emit predictable treatment results for various industrial implements.

In real-world wastewater management projects, treatment system flexibility, treatment efficiency, and stationing speed matter as much as removal performance. MC700 is engineered for exactly these conditions—where conventional civil works are unsuitable, timelines are flattened, or water quality varies notablely. 

By integrating filration and electro oxidation technology with boron doped diamond eletrode as its core components into a rugged, minimized footprint, industrial scale refractory wastewater treatment, it offers a decentralized, high capacity, mobile wastewater treatment solution for on-site non-stop treatment of complex industrial waste streams.

What the Mobile Water Treatment System MC700 Is Designed to Treat

From an engineering perspective, the MC700 addresses three recurring challenges in wastewater treatment:

High-strength or refractory wastewater that is difficult to treat biologically

Temporary or mobile treatment needs, such as emergency response, pilot testing, or rental operation

Space-limited sites where traditional treatment infrastructure is not feasible

By combining a large effective BDD anode area with controlled electrochemical conditions, the MC700 delivers strong oxidation capacity while maintaining operational simplicity.

Core Technology: Electro-Oxidation Application at Industrial Scale

At the heart of the system are eight sets of electrochemical reactor and electro oxidation electrolyzer ME21424. BDD electrodes are selected for their high oxygen overpotential, chemical inertness, and long operational life—critical for continuous wastewater treatment under variable loading.

Total sealed active area of boron doped diamond BDD anode up to 6.72 m²

Current density range: 0–55 mA/cm² (adjustable based on influent quality)

Designed hydraulic circulation: 40 m³/h

This configuration enables efficient degradation of COD, color, odor-causing compounds, and toxic organics without the need for chemical dosing.

Key Features of Mobile Water Treatment System MC700

Check the key features and benfits of the mobile water treatment system MC700 we listed below.

Fully Integrated, Containerized Treatment System

electro oxidation mobile water treatment system

Unlike skid-only electrochemical reactors, the MC700 is delivered as a complete wastewater treatment system, pre-assembled and factory-tested inside a standard container footprint.

Integrated subsystems include:

  Electrochemical reactor with electrolyzer                                        Industrial rectifier and power supply                                      Intelligent PLC-based control system                                                HMI and SCADA interface                                                                Filtration unit                                                                                              Water circulation pump                                                                          Temperature and pressure sensors                                                          Process piping

This approach minimizes on-site installation risk and significantly reduces commissioning time.

Plug-and-Play Operation for Rapid Deployment

electro oxidation mobile water treatment system in container

From an operational standpoint, the MC700 is designed to be installed and running with minimal field work:

Connect three-phase AC 380V / 50Hz power

Connect influent and effluent pipelines

Prepare external supporting units (e.g. tanks and cooling system)

Preset control logic allows the system to operate in fully automatic mode, while still giving operators the ability to fine-tune current density and flow based on treatment objectives.

Key Engineering Advantages of the MC700 Mobile Water Treatment System​

Extra-Large Anode Working Area

A sealed active area of boron doped diamond bdd anodes up to 67,200 cm² supports stable oxidation capacity for continuous industrial operation.

Smart Control Architecture

PLC + HMI + SCADA enables parameter presetting, real-time monitoring, alarm and fault protection, remote supervision possibility

Mobile and Fixed-Site Versatility

The containerized design allows the MC700 to function as a permanent on-site treatment unit, an emergency wastewater treatment system, or it can be a rental or pilot-scale solution

Technical Specifications of the MC700 Mobile Water Treatment System

Model: MC700

Electrolyzer Type: Electrochemical reactors with electrolyzer cells

Anode: Boron-Doped Diamond BDD electrode, dimension at 240*130*3 mm, with quantity up to 112 pieces

Cathode: Titanium electrode, diemension at 354*150*1.5mm, with total quantity of 128 pieces

Total Active Area: 67, 200 cm²

Circulation Capacity: Up to 20 m³/h

Electrical Parameters: Input voltage: AC 380V / 50Hz, Power output: DC 400A / 80V

Hydraulic: Designed circulation flow: 40 m³/h,

Structual: Overall dimensions: 5200 × 2000 × 2000 mm, Net weight: approx. 4000 kg

Integrated Components: filters, water pump, piping, power supply, PLC, HMI, SCADA, sensors, and etc. *Customization available

Operating Conditions: Ambient temperature and pressure

Installation Requirements (User-Provided) of the MC700 Mobile Water Treatment System

To ensure proper operation, users should prepare the following supporting components:

Equalization or septic tanks

Power supply infrastructure

Cooling system (as required by operating conditions)

Customization And Engineering Support for MC700 Are Available

Wastewater characteristics are different from site to site The MC700 reflects our design and manufacturing capabilities in innovative electro oxidation technology, offering a practical, field-ready solution for modern wastewater challenges.
We offer customized system configurations includeing:

Electrode arrangement to emit better results.

Tailored configuration to meet specific needs.

Control logic to realize smart operation and monitoring.

Combining upstream or downstream treatment processes pinpoint the most suitable solution.

Enter your information here.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Scroll to Top